This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
R1713
Ke
Module NRAO-020, 0 GB
experiment did not start on time. First scan 313-2157a (Lucia)
Yg
Module USN-0173, 0 GB
experiment did not start on time. First scan 313-2157a (Lucia)
Scan 314-0301 had incorrect frequency settings. Some DBBC commands intended for Hb12 (under testing) were sent to Yg my mistake.
07:51 UT - reported the error “ALARM: error m5 -104 mk5cn: time-out, connection closed”, which I've previously only seen for Ho 26m. As far as I can tell, again nothing is wrong. (Ellen)
Ho
experiment did not start on time. First scan 313-2156 (bad) (Lucia)
Receiver warm at the beginning, Brett turned the vacuum pump on. wrong receiver. First good scan 313-2258 on source 0748+126. (Lucia)
1:02 UT: cnanot read receiver position correctly. But s/x is on. Receiver still warm, but on its way to get cooler. (Lucia)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1713.1447142072.txt.gz · Last modified: 2015/11/10 07:54 by Lucia McCallum