This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
r1746
Katherine 12m:
Disk VSN: HOB+0105
Data volume at beginning: 10141 gb
15:52 UT Suddenly had many instances of the following error “WARNING: error st -27 computer acu time difference exceeded 0.25 seconds, see value above.”. It eventually stopped, all seems okay. Wiki says this error arises when etransfers are going on, can be safely ignored. (Arwin)
17:00 UT Experiment started OK (Arwin)
Setup code was “setup8f” not “setupsx” (Arwin)
Temp sensor on system monitor not working (Arwin)
Yarragadee 12m:
Disk VSN: HOB+0102
Data volume at beginning: 10141 gb
17:00 UT Experiment started OK (Arwin)
17:05 UT Mark5 lost connection and fmset would not display anything. Halted the schedule. Tried restarting the fs and Dimino but to no avail. Jamie rebooted mark5 and Dimino and made sure ntpq -nq servers were sensible. Fmset came back at this point. Restarted the schedule. Scans missed 179-1705 - 179-1829. (Arwin)
18:32 UT started recording again. (Arwin)
Humidity showing up as zero despite some light rain in the area, sensor not working? (Arwin)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1746.1467103811.txt.gz · Last modified: 2016/06/28 08:50 by Ross Turner