This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
r1786
Hobart
Module: OSOD-351, start position 0.000 GBs
Experiment started okay (Lucas).
Kath
Module: HOB+0034 (StreamStor1) 0.000 GBs
Experiment started okay (Lucas).
18:40 UT, just noticed the maserdelay-clkoff (which was high during setup) has drifted over the last few hours (about 3.7 us!). I'm going to power cycle the dbbc (Lucas).
18:47 UT Clock difference back to within nominal range. Only had to restart DBBC software without full powercycle. Will monitor drift over next hour. Hopefully stable. Missed scans are 093-1839 to 093-1849 (Lucas).
06:50 UT Disc pos behind 32 GB presumably due to missed scans as described above, but if it's due to anything else, we don't know… (Ellen)
Yarragadee
Module: HOB+0021 start position 0.000 GBs
07:04 UT Disc position 22 GB behind where is it supposed to be. No indication why. (Ellen)
09:00 UT Disc position now 26 GB behind so Yg seems to be losing data at about 2 GB per hour. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1786.1491298411.txt.gz · Last modified: 2017/04/04 09:33 by Lucas Hyland