Hobart 12m:

Disk VSN: HOB+0118

Data volume at beginning: 22540.555 GB

• 07:35 UT WARNING: error s1 -112 ifpcn: eof pre-draining input, ifpic probably crashed, connection closed . Checked with on call person, Ellen suggested running another test recording to make sure everything is okay. (AK)
• 07:55 UT Lat offsets was slightly greater than 0.02. Ran the “fivept” command again after setting the offsets to zero (as per on call's instructions) which seems to have brought the offsets below 0.02. Output of the two “fivept” scans is given below (AK)
  1. 07:55:43.19#fivpt#xoffset 250.9413 64.5772 0.00874 -0.03276 0.01198 0.00306 1 1 pictora
  2. 08:27:28.16#fivpt#xoffset 249.2439 59.0836 -0.00582 0.00508 0.01123 0.01390 1 1 pictora
• Fringe checks were not performed since we only have one dish operational. (AK)
• Ran another fivept check to make sure offsets are within limits. Source was 1618m49 results are below. Everything looks good (AK)
  1. 13:34 UT 119.4046 58.4329 -0.00516 -0.00594 0.00271 0.00199 1 1 1618m49
• 18:30 UT Experiment started Okay. (AK)
• 21:06 UT consistently got the following error: “error st -27 computer acu time difference exceeded 0.25 seconds, see value above.” The error stopped around 21:08 UT, wiki suggests it is probably a network issue and only seems to happen when we’re running eTransfers. It can be safely ignored.