User Tools

Site Tools


handover:r4763

This wiki is not maintained! Do not use this when setting up AuScope experiments!

r4763

GENERAL ISSUES

Watchdog timeout alarm isn't sounding for hb. OR any of the other stations ke yg

No alarm for WARNING: error st -10 rampepochtime not -1 when preparing to load, check antenna is in “operate”.

No alarm for WARNING: error st -8 power on timed-out.

No met data onwards from 2015_10_20? Have to wait until data is up before yg logs can be done.

Hobart 12m

Disk VSN: HOB+0129

Data Volume at beginning: 0.3GB

  • 18:30 UT Experiment started OK (Bryn)

Katherine 12m

Disk VSN: BKG-0036

Data Volume at beginning: 0.3GB

  • 18:30 UT Experiment started OK (Bryn)

Yarragadee 12m

Disk VSN: BKG-0064

Data Volume at beginning: 0.3GB

  • 17:40 UT Error st -8 power on timed-out when trying to turn on drives. Tried antenna=open and antenna=operate, drives still stuck. Resetting in HMI did nothing. (Bryn)
  • 18:20 UT Drive error resolved - someone (a mob of kangaroos were seen near the pedestal switch) had activated the emergency stop button on the telescope - required manual disengage on site. (Bryn)
  • 18:30 UT Experiment started OK (Bryn)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/r4763.txt · Last modified: 2016/10/28 21:46 by Lucas Hyland