This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
T2104
Hobart
Module: CURT+102 start pos 1842.4 GB (this was the only module in the mk5 again!!)
1732UT experiment started OK (JS)
00:00 UT - All telescopes 1 second out. Had to reboot the FS as nothing else worked (under the guidance of Jim). Missed scans 182-0010 and 182-0019a. Schedule resumed for scan 182-0021 but the mk5 was still 1 sec out (we forgot to sync). (Ellen)
00:31 UT - Schedule resumed properly with no time differences. First good scan 182-0034b. (Ellen)
00:45 UT - Mk5 decided to correct its own time and so with our correction was out by 1 sec. We then undid our correction. Affected scans 182-0044 and 182-0052. (Ellen)
Katherine
Module: NRCAN-09 start pos 0 GB
1732UT experiment started OK (JS)
00:00 UT - All telescopes 1 second out. Had to reboot the FS as nothing else worked (under the guidance of Jim). Missed scans 182-0019a to 182-0031b. (Ellen)
01:02 UT - Mk5 decided to correct its own time and so with our correction was out by 1 sec. We then undid our correction. Affected scan 182-0102. (Ellen)
Yarragadee
Module: SHAO-017 start pos 0 GB
1732UT experiment started OK (JS)
00:00 UT - All telescopes 1 second out. Had to reboot the FS as nothing else worked (under the guidance of Jim). Missed scans 182-0019a and 182-0021. (Ellen)
01:02 UT - Mk5 decided to correct its own time and so with our correction was out by 1 sec. We then undid our correction. No scans were affected. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/t2104.1435713109.txt.gz · Last modified: 2015/07/01 01:11 by Jesse Swan