User Tools

Site Tools


handover:aua002

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


AUA002

Monitoring Observations on Parkes 64-m: Parkes Monitoring and Setup Instructions

AUA003 is not automatically started at the end of this schedule!

Additionally, AUA003 prc files have ifb=4,agc,1, rather than ifb=4,agc,4, like AUA002. Unsure if this is intentional or not (AUA is AUST-type, right?)

Hobart 12m:

Disk VSN: HOB+0126/32000/1024

Data volume at beginning:

  • Approximately the first 45 minutes of the schedule was too windy for operation. (Chris)
  • 02:55:40UTC: windstow (Liza)

Hobart 26m:

Disk VSN: USN-0002/6000/1024

Data volume at beginning: 0 GB

  • Started at 22:10 UT, because I didn't know/forgot the 26m was included. At least 45 minutes of the schedule was too windy to be used, at least. (Chris)
  • 02:00UT Brett run calu -m pcfs on newsmerd to control the diod – Tsys were not measured correctly.
  • 02:01UT windstowed

Katherine 12m:

Disk VSN: HART+104/8000

Data volume at beginning:

Yarragadee 12m:

Disk VSN: HOB+0124/32000

Data volume at beginning:

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aua002.1430881500.txt.gz · Last modified: 2015/05/06 03:05 by cjordan