User Tools

Site Tools


handover:aua028

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


AUA028

Hobart 26m

VSN module: HOB+1011/16000/1024 Beginning at : 1969.610 GB

Experiments started at: 17:41:08 UT, started late due to module VSN issue

  1. Missed scans: 1022-665 & 0537-441
  2. Error being ignored: error qk -211 tsys value for device au overflowed or was less than zero
  3. Error being ignored: error qk -211 tsys value for device du overflowed or was less than zero
  4. Error being ignored: error ch -350 the receiver 20K stage is hotter than 40K
  5. Error being ignored: error ch -349 the receiver 70K stage is hotter than 85K

Katherine 12m

VSN module: HOB+0100/16000 Beginning at: 0.0 GB

Experiment started OK

  1. Several warnings: warning error 5t -301 don't change mode while recording,use disk_record=off first or (dangerous) use disk_recors_ok as the sixth parameter
  2. Several warnings : error an -103 pointing computer tracking errors are too large

Yarragadee 12m

VSN module: HOB+0067 Beginning at: 0.0 GB

Experiment started OK

  1. 17:41:26 UT : Auto stow released
  2. Several warnings: warning error 5t -301 don't change mode while recording,use disk_record=off first or (dangerous) use disk_recors_ok as the sixth parameter
  3. Several warnings : error an -103 pointing computer tracking errors are too large
/home/www/auscope/opswiki/data/attic/handover/aua028.1507065384.txt.gz · Last modified: 2017/10/03 21:16 by Noor Md Said