This is an old revision of the document!
Hobart 26m
Module: HOB+0130/32000/1024, start pos 7462 GB
2017.343.04:08:52.59;"Windstowed between 343-04:06:36 and 343-04:08:48 2017.343.04:38:27.85;"Windstowed between 343-04:36:12 and 343-04:38:24 2017.343.04:43:11.58;"Windstowed between 343-04:39:52 and 343-04:43:08 2017.343.05:05:41.60;"Windstowed between 343-05:01:10 and 343-05:05:31 2017.343.05:13:14.28;"Windstowed between 343-05:09:47 and 343-05:13:03 2017.343.05:57:06.31;"Windstowed between 343-05:45:07 and 343-05:56:55 2017.343.06:24:18.82;"Windstowed between 343-06:01:39 and 343-06:24:08 2017.343.06:48:58.51;"Windstowed between 343-06:33:46 and 343-06:48:46 2017.343.07:06:06.31;"Windstowed between 343-06:53:02 and 343-07:05:55 2017.343.07:22:43.70;"Windstowed between 343-07:20:27 and 343-07:22:39
'comments.py
'. To auto report windstows and missed scans for c1712ho, download the log to '/vlbobs/ivs/logs/
' and manually remove the line '2017.343.00:07:44.23;“Schedule resumed after end of wind stow.
'. Run 'python /ask/comments/comments_hofix.py
' to generate the email. Run flogit as per normal but make sure you download a fresh copy of the log. Temp workaround until the old anemometer is fixed. (Arwin)Katherine
Module: GSFC+012, start pos 3211 GB
Yarragadee
Module: HOB+01075, start pos 4167 GB
'comments.py
' will auto report this (Arwin).