This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
CRF107
Hobart 26m
Disk VSN: HOB+0119/32000 | Data volume at beginning: 27869.224 GB
1730UT-Experiment started OK (Simin)
1305UT - rxp is not providing focus position info, instead it is returning error about connection with remote host lost. Live page says receiver position is correct. (Tiege)
1400UT - Have arrived at MtP, going to open the valve and cool the S/X receiver. Also needed to put a module in for the next experiment. (Tiege)
1435UT - MK5 crashed when new module went in (despite me waiting until between scans to turn the key on the second bank). Power-cycled the mk5 and everything is back running. No data was recorded between 1435UT and 1450UT. (Tiege)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/crf107.1530111581.txt.gz · Last modified: 2018/06/27 14:59 by Warren Hankey