This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
CRF98
Hobart
Disk VSN: HART-032
Volume at Beginning: 0GB
17:30UT Experiment started OK (Ross)
Katherine
Disk VSN: IPA-0028
Volume at Beginning: 0GB
17:30UT Experiment started OK (Ross)
Yarragadee
Disk VSN: BKG-0037
Volume at Beginning: 0GB
17:30UT Experiment started OK (Ross)
Hobart 26
disk HOB+0025
03:00 UT Just found out that Ho should also be observing. Apparently Warren did start it, though this was missed by AuScope observer. The schedule started late (6 hours late) due to changeover from astronomy schedule confusion. First full scan is 019-0017 at 00:17 UT. Additional problems due to wrong recorder specified in the schedule. Experiments seems to run fine, will send off start message now. (Lucia)
03:50UT Vacuum pressure is at 3.9 (should be <3.5). Told Brett and he will take care of it. (Lucia)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/crf98.1484797882.txt.gz · Last modified: 2017/01/19 03:51 by Jesse Swan