User Tools

Site Tools


handover:dyschd258

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


DYSCHD258

Hobart 12m

vsn HOB+0120, disk_pos 15524.45 GB

  • 23:10 Setup and ready to run (JS)
  • 0107UT Killed observing and disconnected from dynamic session so Brett could work on telescope
  • 0540UT Resumed observing without issue

Katherine

vsn WSRT-061, disk_pos 0 GB Only a 2TB module, the recorder will switch to Bank B for another 2TB

  • 23:10 Setup and ready to run (JS)
  • Continuous errors at the start if a new scan(?) `error m5 -900 not while recording or playing`, appears benign likely just a command issued before disk_record=off (JS)
  • 0357UT Noticed that FS at Ke wasn't responding. It hadn't crashed, somehow it was just (silently) unresponsive. Watch dog hadn't picked this up! I had to force kill fs from terminal (JS)
  • 0401UT Ke removed, FS restart (JS)
  • 0507UT Ke added back in, observing resumed (JS)

Yarragadee

vsn USN-0138, disk_pos 0 GB 4TB module, should be enough

  • 23:10 Setup and ready to run (JS)
/home/www/auscope/opswiki/data/attic/handover/dyschd258.1473832304.txt.gz · Last modified: 2016/09/14 05:51 by Jesse Swan