This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

HOB006

Hobar 26m

2016.295.18:39:43.88?ERROR sp -13 This command not supported for your equipment, check equip.ctl..

2016.295.18:39:43.88?ERROR df -201 Mode must be one of: astro, geo, wastro, test, lba, astro2, or astro3.

2016.295.18:39:44.89?ERROR di -400 IF module position exceeds number of conditioning modules

2016.295.18:39:44.89?ERROR sp -13 This command not supported for your equipment, check equip.ctl.

2016.295.18:39:45.11?ERROR m5 -900 : ENOSYS - not implemented

2016.295.18:39:45.11?ERROR m5 -907 MARK5 return code 7: no such keyword

2016.295.18:39:45.11?ERROR m5 -900 : Unknown datasource mark4

2016.295.18:39:45.11?ERROR m5 -908 MARK5 return code 8: parameter error

2016.295.18:43:57.60?ERROR ib -4 GPIB Device time-out on response ca

2016.295.18:44:20.08?ERROR ib -4 GPIB Device time-out on response mg

2016.295.18:45:57.60?ERROR ib -4 GPIB Device time-out on response ca

2016.295.18:56:20.50?ERROR ib -4 GPIB Device time-out on response pp

2016.295.18:56:55.93?ERROR sp -13 This command not supported for your equipment, check equip.ctl.

2016.295.18:56:55.93?ERROR df -201 Mode must be one of: astro, geo, wastro, test, lba, astro2, or astro3.

2016.295.18:56:55.93?ERROR sp -13 This command not supported for your equipment, check equip.ctl.

2016.295.18:56:55.93?ERROR m5 -900 : ENOSYS - not implemented

2016.295.18:56:55.93?ERROR m5 -907 MARK5 return code 7: no such keyword

2016.295.18:56:55.93?ERROR m5 -900 : ENOSYS - not implemented

2016.295.18:56:55.93?ERROR m5 -907 MARK5 return code 7: no such keyword

2016.295.18:56:55.94?ERROR m5 -900 : ENOSYS - not implemented

2016.295.18:56:55.94?ERROR m5 -907 MARK5 return code 7: no such keyword

2016.295.18:56:55.94?ERROR m5 -900 : ENOSYS - not implemented

2016.295.18:56:55.94?ERROR m5 -907 MARK5 return code 7: no such keyword

2016.295.18:56:56.94?ERROR sp -13 This command not supported for your equipment, check equip.ctl.

2016.295.18:56:56.94?ERROR di -400 IF module position exceeds number of conditioning modules

2016.295.18:56:56.94?ERROR sp -13 This command not supported for your equipment, check equip.ctl.

2016.295.18:56:56.94?ERROR m5 -900 : ENOSYS - not implemented

2016.295.18:56:56.94?ERROR m5 -907 MARK5 return code 7: no such keyword

2016.295.18:56:56.94?ERROR m5 -900 : Unknown datasource mark4

2016.295.18:56:56.94?ERROR m5 -908 MARK5 return code 8: parameter error

Hobart 12m

disk HOB+0098, total data pre-recorded 1910.604+8114.178

* Experiment Started OK (Lucas).

You could leave a comment if you were logged in.