User Tools

Site Tools


handover:ohig106

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


ohig106

= Experiment Name =

Hobart 12m:

Disk VSN: HOB+0029

Data volume at beginning:0

  • 17:30UT Exp started OK, need to check with on-call re ifc and ifd power levels. Levels seem to be okay once the exp started (Arwin)
  • 0050 UT Drives got stuck, error messages about computer acu time difference exceeding 0.25 seconds and ramp epoch time not -1. Tried resetting drives in HMI - drives unresponsive. (Bryn)
  • 0110 UT Drives back online - error with clock on HMI - reboot central fixed the issue. First good scan 046-0126 (Bryn)

Katherine 12m:

Disk VSN: A disk other than BKG-142 (Had to be BKG-142 in the end, discussed with Warren, will need another disk for ohg107)

Data volume at beginning:2026.517

* 17:30UT Exp started OK. (Arwin)

Yarragadee 12m:

Disk VSN: HAY-0144

Data volume at beginning: 0

* 17:30UT Exp started OK. (Arwin)

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/ohig106.1487136640.txt.gz · Last modified: 2017/02/15 05:30 by Ross Turner