User Tools

Site Tools


handover:r1688

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


R1688

Jesse: I have edited the schedules so CRDS77 should start automatically after swapping to the correct module with a 1 minute delay (but you should definitely make sure this actually happens…) And cos I'm so nice, I even drudged the schedules for you, so it should roll straight over all by itself :) Well except for the 26m, you'll have to set that up. (Ellen)

Hobart 12m:

Disk VSN:UAO-0014/2000

Data volume at beginning: 0TB

  • 17:00 UT - Experiment started ok

Katherine 12m:

Disk VSN:HOB+0128/32000

Data volume at beginning: 23297TB

  • 17:00 UT - Experiment started ok
  • 17:35 UT - Delay difference crept up to -0.5us. Ran fmset and fixed it. (Ellen)
  • 21:29 UT - Delay difference again got too big. Restarted and reconfigured the DBBC since this time fmset alone didn't fix it. Missed scan 138-2140c as a result. (Ellen)
  • 22:23 UT - Delay difference is drifting AGAIN. clkoff seems to be the culprit. (Ellen)
  • 22:35 UT - Restarting DBBC again, since delay difference again reached -0.5 us. Emailing Jamie… (Ellen)

Yarragadee 12m:

Disk VSN: NRCAN-09/2000

Data volume at beginning: 0TB

  • 17:03 UT - Experiment started late due to network connection loss (in my sleep-deprived state it didn't occur to me to call the station and ask them to reset things until just before it was meant to start). Only missed scan 138-1700b. (Ellen)
  • 17:06 UT - mk5=dot? returned value of almost -1. Ran fmset between scans and it came good, except the delay difference jumped 0.05us but is now steady again. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1688.1431988710.txt.gz · Last modified: 2015/05/18 22:38 by Ellen Manning