User Tools

Site Tools


handover:r1698

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r1698 [2015/07/27 22:49]
Jesse Swan
handover:r1698 [2015/07/28 04:08] (current)
liza
Line 19: Line 19:
   * 20:18UT - Recording for first scan has not stopped, other scans may have been tracked and recorded. Field system restarted but contact could not be re-established after several reboots (Ross).   * 20:18UT - Recording for first scan has not stopped, other scans may have been tracked and recorded. Field system restarted but contact could not be re-established after several reboots (Ross).
   * 21:47UT - Connection to pcfske established but schedule could not be restarted, date set at 2007 (Ross).   * 21:47UT - Connection to pcfske established but schedule could not be restarted, date set at 2007 (Ross).
 +  * 22:​40UT-23:​20UT - pcfs running fine, fs running, fmset shows all times aligned. However ps log window shows times 08:10 or so. Antenna trips (antenna slewing, antenna stuck) when trying to slew to the source. Rebooted pcfs (Liza) 
 +  * 23:25UT - pcfske set up to observe, with 208-2328 being first recorded scan. Also may be useful previous scans: 208-1730, first 2GB (Liza) 
 +  * After each scan recorded pcfs fs log window shows prompt for password: <​code>​ 
 +23:​48:​21#​antcn#​TR $$/​208.23:​48:​21.11 ​  ​90.1994 ​  ​53.2181 ​   0.0001 ​  ​-0.0002 
 +23:​48:​21#​antcn#​CO ​                     -0.3403 ​   0.4509 ​   0.0718 ​   0.0168  
 +Password:  
 +</​code>​ If any key is not pressed, all subsequent activity of fs is locked. (Liza)  
 +  * 00:10UT - Culprit is identified as weather command in midob. GA weather station seems to be changed in some way and asking for password. Disabled wht command in midobs for now. No weather information since beginning of experiment. (Liza) 
 +  * Repeatedly antenna tracking outside of tolerance (23:20 onwards): <​code>​ #​antcn#​Antenna outside nominal tracking tolerance of 0.0045 degrees, current tolerance 0.0100.</​code>​  
 +  * 01:55UTC - wth recording re-enabled following implementation of the new security measures at the station (by Jamie) (Liza) 
 +  * S-band Tsys are high (105-155K)
 {{tag>}} {{tag>}}
  
  
 ~~DISCUSSION~~ ~~DISCUSSION~~
- 
/home/www/auscope/opswiki/data/attic/handover/r1698.1438037350.txt.gz · Last modified: 2015/07/27 22:49 by Jesse Swan