Hobart 26m

Module: HOB+0096, start pos 3170GB

• 1702UT - Late start (2min) (JS)
• 1709UT - ch09, and ch03 very low voltage. Others are fine in channel range, so leaving if values for now (JS)
• 2114UT - Receiver stuck in Lband Scans failed 278-1700 through 278-2217 (JS)
• 2157UT - OTTER interface reset (using 'r' command) and SX reciever put on axis (JS) [Have updated the setup notes to include this as a fix for stuck reciever]
• 2205UT - ch09, and ch03 still bad readings (JS)
• 2210UT - Field system restarted (wasn't behaving with schedule resume) (JS)
• 2220UT - Scan 278-2217 successful (JS)
• 2335UT - Hobart26 drives have been switched off since ~2300UT, despite various claims (e-RemoteCtrl, antenna monitor etc.) that the antenna is slewing to source (SS)
• Antenna stowed due to high wind at ~00:20UT
• 08:00 UT Mark VI formatter time inconsistent with DAC time (lagging by 1 second), has been corrected for future scans/experiments (Ross)
• 08:00 UT Mark VI IF channels 03 and 09 showing error lights, problem has been resolved for future scans/experiments (Ross)

Katherine

Module: UAO-0031, start pos 0GB

• 1700UT - Experiment started okay (JS)

Yarragadee

Module: HOB+1007, start pos 11401 GB

• 1700UT - Experiment started okay (JS)