User Tools

Site Tools


handover:r1786

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


r1786

Kath

  • Experiment started okay (Lucas).
  • 18:40 UT, just noticed the maserdelay-clkoff (which was high during setup) has drifted over the last few hours (about 3.7 us!). I'm going to power cycle the dbbc (Lucas).
    • 18:47 UT Clock difference back to within nominal range. Only had to restart DBBC software without full powercycle. Will monitor drift over next hour. Hopefully stable. Missed scans should be picked up in comments.py (Lucas). -Lucas: missed scans should be reported by the observer at the time, and later checked by the finishing person.
  • 06:50 UT Disc pos behind 32 GB presumably due to missed scans as described above, but if it's due to anything else, we don't know… (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1786.1491289048.txt.gz · Last modified: 2017/04/04 06:57 by Elizabeth Iles