This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
r1786
Hobart
Module: OSOD-351, start position 0.000 GBs
Kath
Module: HOB+0034 (StreamStor1) 0.000 GBs
Experiment started okay (Lucas).
18:40 UT, just noticed the maserdelay-clkoff (which was high during setup) has drifted over the last few hours (about 3.7 us!). I'm going to power cycle the dbbc (Lucas).
18:47 UT Clock difference back to within nominal range. Only had to restart DBBC software without full powercycle. Will monitor drift over next hour. Hopefully stable. Missed scans should be picked up in comments.py (Lucas). -Lucas: missed scans should be reported by the observer at the time, and later checked by the finishing person.
06:50 UT Disc pos behind 32 GB presumably due to missed scans as described above, but if it's due to anything else, we don't know… (Ellen)
Yarragadee
Module: HOB+0021 start position 0.000 GBs
07:04 UT Disc position 22 GB behind where is it supposed to be. No indication why. (Ellen)
09:00 UT Disc position now 26 GB behind so Yg seems to be losing data at about 2 GB per hour. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1786.1491298155.txt.gz · Last modified: 2017/04/04 09:29 by Lucas Hyland