This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

r4660

hb

ke

yg

Recorded to USN-0119 (along with crf84 bound for Washington), start 1883 GB
23:30 UT: Antenna moving off source, but subsequently reaquiring target (Ross).
23:32 and 01:05 UT: Antenna stuck, but problem resolved itself (Ross).
01:47 UT: Antenna still moving off source for most/every source (Ross).
05:44 UT: As above, antenna still moving off source for most/every source (Ross).
07:18 Antenna stuck, then onsource/TRACKING, then off-source and re-acquired - kept repeating through scan 311-0722 (Ellen)

Yg log monitor only showing some entires (sometimes not showing Recording stopped, or started). E.g.

“

2014.311.07:20:30 Recording stopped

2014.311.07:20:31 Data recorded = 2959.480 GB, Last scan = 7.949 GB

2014.311.07:20:31 Scan name = 311-0722

2014.311.07:21:55 Data recorded = 2959.480 GB

2014.311.07:35:04 Data recorded = 2984.716 GB

2014.311.07:35:10 Recording stopped

2014.311.07:35:10 Data recorded = 2984.896 GB, Last scan = 25.417 GB

2014.311.07:35:11 Scan name = 311-0736a

2014.311.07:36:34 Data recorded = 2984.896 GB

2014.311.07:36:34 Recording started

2014.311.07:53:26 Recording stopped

2014.311.07:53:26 Data recorded = 3013.774 GB, Last scan = 21.955 GB

2014.311.07:53:26 Scan name = 311-07562014.311.07:53:26 Recording stopped

2014.311.07:53:26 Data recorded = 3013.774 GB, Last scan = 21.955 GB

2014.311.07:53:26 Scan name = 311-0756

” (Ellen)

You could leave a comment if you were logged in.