User Tools

Site Tools


handover:r4716

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r4716 [2015/12/04 08:18]
Jesse Swan
handover:r4716 [2015/12/04 13:54] (current)
Jesse Swan
Line 20: Line 20:
   * UT0815 system temps are high +150-200K ​ (JS)   * UT0815 system temps are high +150-200K ​ (JS)
   * UT0816 there has been no pcfs activity for 15min I believe that after manual disk_record=on the recording continued but the telescope did not move according to the schedule. I have issued a schedule=r4716ke in the hopes that this fixes the issue at the cost of a further 5min of data (JS)   * UT0816 there has been no pcfs activity for 15min I believe that after manual disk_record=on the recording continued but the telescope did not move according to the schedule. I have issued a schedule=r4716ke in the hopes that this fixes the issue at the cost of a further 5min of data (JS)
 +  * UT0829 Scan 338-0829 successful. It can be assumed that everything between this and 338-0731 is affected. (JS)
 +  * 12:09 UT - Wind monitor reporting speed of 1000 km/h and says the telescope is stowed. It is actually not stowed and from what I can tell, it is tracking and following the schedule as it should. Noted in the log. (Ellen)
 +  * 13:31 UT - DBBC computer restarted itself again and this took the drive computer offline and the telescope got stuck on the horizon. Bad/missed scans: 338-1330 to 338-1334. (Ellen)
 +  * 13:46 UT - And again DBBC crashed and took the drive computer offline and the antenna got stuck. Restarted everything. Bad/missed scans: 338-1347a and 338-1349. (Ellen)
  
 **Yarragadee** **Yarragadee**
/home/www/auscope/opswiki/data/attic/handover/r4716.1449217131.txt.gz · Last modified: 2015/12/04 08:18 by Jesse Swan