User Tools

Site Tools


handover:r4726

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


r4726

Hobart 12m

Module: HOB+0119, start pos: 4893 GB

  • 18:33 UT - Experiment started 6 min late due to slow setup (Missed scans 042-1830b to 042-1836). (Bryn)
  • 00:37 UT - the wind sensor in Ke is broken. Brett disconnected it last week, now it is sending a 'stow-command' in the System Monitor. This should be ignored and does not actually cause the antenna to stow. (Lucia)
  • 14:10 Accidently cycled Hb DBBC instead of Ke.. scans affected: 043-1408, 043-1411, 043-1414, 043-1422, 043-1426a, 043-1433, 043-1434b, 043-1440b
  • 14:30 DBBC timeout. Rebooted DBBC and ran fmset
  • 14:55 restarted PCFS due to log monitor not displaying 'recording'
  • 15:23 ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts. Rebooted DBBC and reran fmset again

Katherine 12m

Module: BKG+0135, start pos: 0 GB

  • 18:33 UT - Experiment started 6 min late due to slow setup (Missed scans 042-1830b to 042-1836). (Bryn)
  • 14:08:46 ALARM: Delay through DBBC has changed. Scan affected is 043-1408 (Jonathan)
  • Again at 14:15. Rebooting DBBC
  • 14:20 reconfigured DBBC: scans affected: 043-1408, 043-1411, 043-1414, 043-1422, 043-1426a, 043-1433, 043-1434b, 043-1440b
/home/www/auscope/opswiki/data/attic/handover/r4726.1455290747.txt.gz · Last modified: 2016/02/12 15:25 by Jim Lovell