This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
r4726
Hobart 12m
Module: HOB+0119, start pos: 4893 GB
18:33 UT - Experiment started 6 min late due to slow setup (Missed scans 042-1830b to 042-1836). (Bryn)
00:37 UT - the wind sensor in Ke is broken. Brett disconnected it last week, now it is sending a 'stow-command' in the System Monitor. This should be ignored and does not actually cause the antenna to stow. (Lucia)
14:10 UT Accidently cycled Hb DBBC instead of Ke.. scans affected: 043-1408, 043-1411, 043-1414, 043-1422, 043-1426a, 043-1433, 043-1434b, 043-1440b
14:30 UT DBBC timeout. Rebooted DBBC and ran fmset
14:55 UT restarted PCFS due to log monitor not displaying 'recording'
15:23 UT ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts. Rebooted DBBC and reran fmset again
15:44 UT ALARM: Delay through DBBC has changed. & WARNING: Mark5 reports sync error. Recording seems to be OK, possibly due to break in schedule?
15:52 UT ALARM: Large difference between formatter and maser delays. & Still Mark5 sync error. Ran fmset to resync, syncerror_gt_3 is now syncerr_gt_0
Katherine 12m
Module: BKG+0135, start pos: 0 GB
18:33 UT - Experiment started 6 min late due to slow setup (Missed scans 042-1830b to 042-1836). (Bryn)
14:08:46 ALARM: Delay through DBBC has changed. Scan affected is 043-1408 (Jonathan)