This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

rd1906

Hobart 26m

Disk VSN: HOB+0132 | Data volume at beginning: 7178 GB

1800UT Experiment started OK (Katie)
1815UT Was getting the 'previous source not reached before new source commanded' error after every scan. Wind was low so no recent wind stows. Noticed that another fs output after every scan was 'Antenna drives not on, switching them on'. Checked the live page and drives were off.Trying using the onsource command but that did not work. Solution was to go to vdesk (type in newsmerd) then 'abort' and then 'drvon'. This clears any previous commands that the antenna gets stuck on. (Katie)
First scan 191-1855 (Katie).
0220 - Ho26 windstowed (JMc)

You could leave a comment if you were logged in.