hardware:dbbc.calibration

This wiki is not maintained! Do not use this when setting up AuScope experiments!

DBBC Calibration

Apply a tone of 764 MHz at -15 dBm to one input 1 of all four CoMos
Use dbbc_config_file_104_calibration.txt
Set dbbcifa/b/c/d=3,agc,1 (i.e. input 3, filter 1)
Once gains have stabilised, turn off the agc loop with dbbc=dbbcgain=all,man
Run “calibration” in DBBC Control
dbbc=dbbcgain=all,agc
The results are written to C:\ as yyyy-ddddThhmmss-calib.txt
The file has 5 columns: phase, CoMo A/B/C/D value. Pick the phase at the null past the first peak.

/home/www/auscope/opswiki/data/pages/hardware/dbbc.calibration.txt · Last modified: 2013/10/02 03:56 by Jim Lovell