User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Network connection
Orig IP Dest Usage
FlexBuff DBBC 3 IF A
FlexBuff DBBC 3 IF B
FlexBuff DBBC 3 IF C
FlexBuff DBBC 3 IF D
FlexBuff DBBC 3 IF E
FlexBuff DBBC 3 IF F
FlexBuff [Reserved] Network
FlexBuff DBBC 2 S-band
dBBC3 . FlexBuff IF A
dBBC3 . FlexBuff IF B
dBBC3 . FlexBuff IF C
dBBC3 . FlexBuff IF D
dBBC3 . FlexBuff IF E
dBBC3 . FlexBuff IF F
dBBC2 . FlexBuff S-band


Flexbuff network settings are defined in /etc/network/interfaces/. New Debian versions tend to label eth0 into ens3f0. The definitions might vary depending on the host machine:

' ' auto eth1 ' iface eth1 inet static ' address ' mtu 9000

dBBC3 .

dBBC2 .

Guifre 2019/09/03 01:41

/home/www/auscope/opswiki/data/attic/network.1567481639.txt.gz · Last modified: 2019/09/03 03:33 by Guifre