This is an old revision of the document!
The Hobart26m uses the DBBC backend for these experiments rather than the mk5 rack. Unfortunately, the FS only supports controlling one “rack” at a time, so you need to edit configuration files and restart the FS to swap between the backends. There are some instructions included below.
hobart
, terminate the FS and then run the following commands:cp /usr2/control/mk5ad.mk5ho.ctl /usr2/control/mk5ad.ctl
cp /usr2/control/equip.dbbc2.1gbps.ctl /usr2/control/equip.ctl
fs
and then check that the correct mark5 is selected with mk5=dot?
- this should return a “normal” response, as for the AuScope antennas.setupxx
.