This is an old revision of the document!
Open a VNC session to the DBBC you want to configure from the Applications menu on Ops2:
In C:\DBBC_CONF\
are several configuration files for different experiment types. The default configuration is kept in dbbc_config_file_v102.txt
and this will be loaded when the server software is started.
Check to see if a program called DBBC Control net
is running. If it's not running, start it. There's a link to it from the desktop.
If the DBBC has had a power cycle or if there have been timing problems, or if you just want to be cautious, say “y” when asked if you want to use the default config. Configurations will take about 2 minutes.
dbbc=pps_sync
Lastly, make sure the Client software is NOT running on the DBBC. The Field System can't connect to the server if another client is running. Look for DBBC Control net.exe
running in a terminal window. If you find it, exit it.
Just for reference, the configurations used for IVS are:
dbbc_config_file_102_geo.txt
for R1 and R4 geodesydbbc_config_file_102_aust.txt
for AUSTRAL sessionsdbbc_config_file_102_apsg_crf.txt
for APSG, CRDS and CRF geodesydbbc_config_file_102_T2_OHIG.txt
for T2 and OHIGdbbc_config_file_102_point.txt
for pointing observations