Update: Transfers directly from mounted diskpacks have significantly higher rates of failure. Staging data to RAID is strongly recommended!

Update: The mark5B upgrade to SDK9.2 has adversely affected fuseMk5 performance. It is not uncommon for the program to crash, sometimes with kernel panic during copy operations. A workaround script using DIMino has been kludged together and is in ~oper/recovery/ but is still in development.

• Use a VNC session to run the transfers - the hobart.phys.utas.edu.au:1 session is normally a good option.
• Open four terminal windows on the Mark5 unit the data will be sent from
• In the first terminal, make sure that neither fuseMk5 or dimino is running

  ps -ef | grep DIM

  and

  ps -ef | grep fuse

  and that another transfer isn't running

  ps -ef | grep tsuna

  .

• If fuseMk5A is running and the wrong module is mounted, dismount with

  fusermount -u <directory_name>

• Then use fuseMk5 to mount the module:

  fuseMk5 --bank=0 --verbose --cachesize=128000000 /mnt/diskpack

  This will mount Bank A (set bank=1 for Bank B) at /mnt/diskpack. Wait for a message to say

  .... Registering fuseMk5A to FUSE with: ....

  . It can take a while. Background this process with Ctrl-z and

   bg 

  .

• In a second terminal, change to the mounted directory and make sure the data are there

  cd /mnt/diskpack
  ls

• Start the tsunami daemon to send the data:

  tsunamid --port=52100 *

• In the third terminal window, log on to the computer at Bonn that will receive the data and change to the directory where the data will be sent

  ssh evlbi@<machine.address>
  cd /data3/r1/hobart12/r1485/

  The Bonn web page shows available servers and space.

(194.94.199.163 = io10, 194.94.199.164 = io3, 194.94.199.166 = sneezy2)

• Start tsunami and set up for a transfer

tsunami
set rate 300m
connect 131.217.63.175 52100
get *

• in the fourth terminal window, create an empty file with a name describing the start time of the transfer, rate etc:

  touch 20110525033000_r1485_Hb_Bonn_300m_52100_sneezy2_start

  This puts an entry on the Bonn web page to say there's a transfer under way

• and send it to the web server

  ncftpput ftp.mpifr-bonn.mpg.de /incoming/geodesy/transfers 20110525033000_r1485hb_Hb177_Bonn_300m_52100_sneezy2_start

• When the transfer finishes, send a stop message with

  touch 20110525033000_Hb_stop
  ncftpput ftp.mpifr-bonn.mpg.de /incoming/geodesy/transfers 20110525033000_Hb177_stop

It is also possible (and preferable) to export the data onto a RAID first. Currently, there are five RAIDS which can be used for temporary storage at Hobart - Vortex, Cornucopia, Jupiter (which contains two separate RAIDS of 6 and 12 TB) and Magilla. These can be NFS mounted on the mk5 machine with

mount vortex.phys.utas.edu.au:/exports/vortex_internal/ /mnt/vortex

(as root). Once mounted the data can be copied with

cp /mnt/diskpack/r1485* /mnt/vortex/r1485hb/

.

Once fully copied, please check the data has not been corrupted in the transfer. ssh into the NFS host as observer and run

./directory2list /exports/vortex_internal/r1485hb Mark5B-256-16-1

. The output to the screen will be the list of all the scans with the start mjd/time and a summary indicating if problems were found. If bad scans are found, a summary at the end will warn you, and list of bad scans will be made available.

After a transfer to Bonn completes, you should run

directory2filelist /data3/r1/hobart12/r1485/ Mark5B-256-16-1

to check for errors in transmission.