This is an old revision of the document!
The ultra-rapid EOP measurements use either modified IVS schedules (with Hobart in “tag-along” mode) or bespoke schedules. In either case, the usual slogit procedures can be used but you should make sure that the correct skd file is in /vlbobs/ivs/sched/ on ops-serv2 before starting & make sure it doesn't get overwritten by downloading the unmodified schedule.
Prepare the schedue and procedure files as usual but make sure the preob and postob procedures look like this:
define preob 00000000000x onsource disk2file=abort,, !+5s scan_check mk5=get_stats? mk5=status? systemp12 mk5=dot? clkoff maserdelay enddef define postob 00000000000x scan_check !+3s sy=/home/oper/bin/data2vortex.sh & clkoff maserdelay enddef
Also check that /home/oper/bin/data2vortex.sh is going to do the right thing, check that the directory on vortex is mounted on mk5hb.
Then in the SNAP file on pcfs[hb|ke|yg], remove all checkmk5 calls like this:
cd /usr2/sched grep -v checkmk5 rd1106hb.snp > tmp.snp mv rd1106hb.snp rd1106hb.snp.orig mv tmp.snp rd1106hb.snp