This wiki is not maintained! Do not use this when setting up AuScope experiments!

1. Tsys missing from PreOb definition on r4485. Why?
2. HMI Display Update check box should default to ON
3. HMI Current Time display - correct spelling error 'Initialize' (or preferably 'Initialise') vice 'Intitialize'.
4. Remove pmSTALM from wiki?
5. Receiving “ERROR sc -18 setcl: program is already running, try “run setcl” instead.” after “sy=run setcl offset” from a terminal window. In each case, “sy=run setcl offset” in Oprin window worked OK. What is going on?
6. No X-Band fringes at Yarragadee
7. X-Band Tsys at Yarragadee lower than expected. Calibration slipping?
8. Fill in the “Mark5B Setup” page in the Ops Wiki.