User Tools
Sidebar
operations:revised_procedure_using_scripts
This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
This is a slightly faster method to setup up the telescopes using a variety of scripts developed by the observers and operations staff over the years. The procedure listed below hasn't undergone much testing and as a result should only be used if you are experienced in setting up the telescopes the old way.
Prepare the schedule file
- Open up a terminal and type
ssh observer@ops-serv2
and then
~/slogit.auscope_fs9.10.5.sh
- Once the emacs sessions to the proc files are open, you will need to make sure the right IFs are selected. For R1, R4, AUSTRAL, CRF, CRDS, AUG, AUA and RDV experiments they should be:
ifa=1,agc,1 ifb=4,agc,4 ifc=2,agc,2 ifd=2,agc,2 dbbcform=geo
For APSG, OHIG, AOV and T2 experiments they should be:
ifa=1,agc,1 ifb=4,agc,1 ifc=2,agc,2 ifd=2,agc,2 dbbcform=geo
- These are the default IF power levels for the three DBBCs.
Telescope ifa ifb ifc ifd Hobart 40000 48000 32500 35000 Katherine 42000 34000 32000 42000 Yarragadee 25000 29000 35000 35000
Setting up the observing windows
- Check that the appropriate software is running on the pcfs, timing, and the DBBC computers.
**Timing PC:** HMI ("UOT 12m Antenna-xxx"), Tac32Plus, and the AneMonitor. **PCFS:** field system **DBBC:** - Close the existing windows on the screen by opening up a terminal and typing
windex
and then manually closing any stragglers.
/home/www/auscope/opswiki/data/attic/operations/revised_procedure_using_scripts.1511501043.txt.gz · Last modified: 2017/11/24 05:24 by Arwin Kahlon
