operations:van_setting

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Setting VSN labels

DO NOT use this procedure if there is already data on the module. It will erase the data

If the VSN reported by e-Remote control doesn't agree with the sticker, do the following:

First make sure you have the correct module selected, then…

If the bar-coded label says, for example “HOB+0056”, at e-Remote Control prompt:

mk5=protect=off
mk5=vsn=HOB+0056
mk5=vsn?

The last command should return the label name, disk capacity (in GB) and block size. Confirm that this agrees with the label.

/home/www/auscope/opswiki/data/pages/operations/van_setting.txt · Last modified: 2014/08/25 01:46 by Imogen Jones