This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- operations:agenda2017_02_02 [2017/02/02 01:01]
Arwin Kahlon created
+++ operations:agenda2017_02_02 [2017/02/02 02:12] (current)
Arwin Kahlon
@@ Line 1: / Line 1: @@
 Chair/Presenting: Arwin
-In Attendance:
+In Attendance: Nick, Lucia, Jamie, Jonny, Bryn, Jesse, Ross
-Apologies: Tiege, Liz, Nick
+Apologies: Tiege, Liz, Lucas, Jim
+General Issues
+  * The observer on from 9-5, please check if the correct modules are loaded in for the night?
+  * Meeting roster is still pretty much empty, fill it!
+Issues from the logs
+  * rd1702-ho26m-getting error qy -1 error in response from counter. Tried restarting with 'counter' command. No response when issuing clkoff and maserdelay commands. Called on-call (Warren), to attempt to fix (Bryn) and WARNING: error ib -4 gpib device time-out on response ca. Error likely related to previous, trying to reset with counter does nothing. Manual reset of GPIB device might be needed (had a similar issue to this a few months ago) Waiting until staff on site to fix. (Bryn) - Hardware failure, not critical if you can read the clkoff
+  * r1777-hb12m- During scan 031-0938 the power for the media converter died. Required me to drive out to the telescope and call Brett who talked me through it. (JR) -solutions seems to be something that Brett needs to sort out as per his email.
+  * aua016-yg12m- mk5 had crashed and needed a few power cycles before it came back online. Is there a better procedure for this?  -kvm console