This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Meeting 23rd November

Chair: Arwin

Present:

Apologies: Jesse

Absent:

General Issues:

• Please check your emails prior to every shift start, even if the experiment is a vanilla r1 or r4.

Issues in Handover Notes:

• r4817: If the delay difference is massive and a reconfigure/power cycle to DBBC + fmset sync hasn't fixed it, try running counter in the eremote control to reset 'maserdelay' and 'clkoff'.
• Yg drives getting stuck periodically. Happened for r1818
• aov018: Eremote control not connected, in such cases start the experiment using the VNC to relevant pcfs computer. To get alarms you'll need to open a terminal on ops8 and type example ./stream_log hb, repeat for any other stations needed (dont close the terminal). In the log monitor select file '/tmp/hb.log' or equivalent station, as usual run 'cloff' before reading the file in the log monitor.