This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- operations:agenda2019_07_25 [2019/07/25 02:01]
Jayender Kumar
+++ operations:agenda2019_07_25 [2019/07/25 03:10]
Jayender Kumar
@@ Line 1: / Line 1: @@
 **Chair:** Jay
-**Attended:**
+** next week's chair: ** Lucas
+**Attended:** katie, Lim, Patrick, Tiege, Simin, Earl, Jamie,
 **Apologies:**
@@ Line 9: / Line 11: @@
 **General Issues**
- * internet connection issue was quite a big headache throughout all experiments for Yg.
+ * internet connection issue was quite a big headache throughout all experiments for Yg. Brett is on it.
@@ Line 27: / Line 29: @@
   * CRF112:
-   *Hobart 26m:- error - can't record while other data transfers. Had to reboot mk5.
+   *Hobart 26m:- error - can't record while other data transfers. Had to reboot mk5. Windserver at hobart is reliable. Don't run external halt commands.
   * T2133:
-   *Yarragadee 12m:- DBBC delay jumped. Clocks are stable (-0.311 ns offset) and fmset is returning sensible values, but dbbc=pps_delay returns ~810168373. running fmset, and pps_sync, reconfiguring, rebooting didn't worked. reconfiguring again???
+   *Yarragadee 12m:- DBBC delay jumped. Clocks are stable (-0.311 ns offset) and fmset is returning sensible values, but dbbc=pps_delay returns ~810168373. running fmset, and pps_sync, reconfiguring, rebooting didn't worked. reconfiguring again??? pci card is now replaced , that seems to solve this particular problem.