This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Chair: Patrick

Next meeting chair: Katie

Attended:

Apologies:

General Issues

Handover Issues

• R4953
  • Yg:
    • Network issues (Jamie)
      • The communication was on/off for few hours for this experiment and after that it was ok.
    • mk5 connection closed. It might be a problem with the recorder or module (Lim)

• R1954
  • Ho:
    • Stuck drives?!
      • Via vdesk and drvon will bring back the antenna to the schedule. Sometimes we have to try several times. Drives need to be fixed.
    • continuous error ma -4 device rx timed-out not response (Mas & Lim)

• AUM017
  • Hb:
    • Config & mark5B issues (Jamie)
      • It was a rush up to start the experiment that causes these issues.
    • lost antenna comms. antenna comms restored (Warren)
      • The “antenna=open” command solved the problem.

• R1955
  • Ho:
    • Problem with the drive. Warren needs to restart the drive manually (Mas)
    • continuous error ma -4 device rx timed-out not response. terminate the PCFS and halt schedule. Received error “Allocating memory for antenna monitoring”. Couldn't connect to vdesk even after rebooting the sys26m (Mas)
    • Brett used 'source=disable' to reestablish communications (Jamie)
    • Source not reached. Encoder glitch? (Jamie)