This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
operations:documentation.eremotecontrol_checklist_end [2012/09/04 06:21] Jim Lovell |
operations:documentation.eremotecontrol_checklist_end [2014/08/13 05:56] (current) liza |
||
---|---|---|---|
Line 4: | Line 4: | ||
* **Antenna: back in stow position**\\ Check the antenna status display in the system monitor window and check that the antenna has returned to stow. If not, issue a ''source=stow'' command. | * **Antenna: back in stow position**\\ Check the antenna status display in the system monitor window and check that the antenna has returned to stow. If not, issue a ''source=stow'' command. | ||
- | * **Log files processed**\\ If there is another experiment following straight on from this one, this can be deferred until the next experiment is up and running. Otherwise, step through the following procedure now: | + | * **Copy and paste relevant Handover notes from the wiki to the Additional Notes section below**\\ Go to the [[operations:handover|Handover notes]] page and copy any relevant notes for this antenna into the Additional Notes section of the checklist. |
- | * [[operations:documentation.ivs.Logs|Processing logs and shipping data]] | + | * **Close this window, then process the log and [[operations:documentation.ivs.commentsfile|send the end experiment email]]**\\ Not really a question but a request. Please submit this last checklist (so the output gets copied to the log), then process the log and send the end experiment email as described in the [[operations:documentation.ivs.finishing_v2|Finishing an observation]] section. You may need to defer this step if there is another experiment following immediately. |
- | * **Finish email sent**\\ The final step in the log file processing procedure is to send a finish email to IVS | + | |