This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Transferring Data to Bonn

Open four terminal windows on the Mark5 unit the data will be sent from
In the first terminal, make sure dimino isn't running
```
ps -ef | grep dim
```
and that another transfer isn't running
```
ps -ef | grep tsuna
```
.
Check no moudules are mounted at /mnt/diskpack or /home/oper/wash. If they are, dismount with
```
fusermount -u <directory_name>
```
Then use fuse to mount the module:
```
fuseMk5A --bank=0 --verbose /mnt/diskpack
```
This will mount Bank A (set bank=1 for Bank B) at /mnt/diskpack. Wait for a message to say
```
.... Registering fuseMk5A to FUSE with: ....
```
. It can take a while.
In a second terminal, change to the mounted directory and make sure the data are there
```
cd /mnt/diskpack
ls
```
Start the tsunami daemon to send the data:
```
tsunamid --port=52100 *
```
In the third terminal window, log on to the computer at Bonn that will receive the data and change to the directory where the data will be sent
```
ssh evlbi@<machine.address>
cd /data3/r1/hobart12/r1485/
```
Start tsunami and set up for a transfer

~/australia/tsunami-udp-r42/client/tsunami
set port 52100
set server 131.217.63.175 (or whatever the IP of the Mark5 is)

in the fourth terminal window, create an empty file with a name describing the start time of the transfer, rate etc:
```
touch 20110525033000_r1485_Hb_Bonn_300m_52100_start
```

and send it to the web server

ncftpput ftp.mpifr-bonn.mpg.de /incoming/geodesy/transfers 0110525033000_r1485_Hb_Bonn_300m_52100_start