User Tools

Site Tools


operations:documentation.ivs.hbpaperwork1

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
operations:documentation.ivs.hbpaperwork1 [2011/06/03 02:21]
Jim Lovell created
operations:documentation.ivs.hbpaperwork1 [2014/05/02 10:32] (current)
Jamie McCallum
Line 3: Line 3:
  
   * Remove module from the Mark5B recorder and put a red sticker over the green dot. The sticker will (should) be on the workbench under the whiteboard. ​   * Remove module from the Mark5B recorder and put a red sticker over the green dot. The sticker will (should) be on the workbench under the whiteboard. ​
-  * Go to the printer in the office and put a sheet of sticky labels into the printer'​s tray (printable side up, and make sure it's the correct size with 7 rows and 2 columns) and note the row and column of the label to be printed to (Counting from the top left of the sheet as you look at it in the tray). ​+  * Go to the printer in the office and put a sheet of sticky labels into the printer'​s tray (printable side down, and make sure it's the correct size with 7 rows and 2 columns) and note the row and column of the label to be printed to (Counting from the top left of the sheet as you look at it in the tray). ​
   * On pcfshb, run <​code>​cd /usr2/log   * On pcfshb, run <​code>​cd /usr2/log
 drudg <log file> all <x> <y> drudg <log file> all <x> <y>
/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.hbpaperwork1.1307067713.txt.gz · Last modified: 2011/10/26 06:37 (external edit)