This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

---

Starting from scratch (using VNC sessions timeke:0 dbbcke:0 pcfske:1)

• Check Displays on timeke (antenna, maser, anemometer, Clock)
• Check DBBC server is running in dbbcke
• On pcfske:
  • ssh to mk5ke and check mk5 software is running
  • Start FS
  • run fmset, check clocks are OK (looking for NO sycerr_gt_3 for Mark5B, all 3 times synchronised). If a problem, use option 's'. ESC when finished
    • in the FS load the first non-fringe-finding experiment :
      • proc=v252aike
      • setup01
    • Now do a test recording check spectra and bit stats
      • disk_record=on
      • disk_record=off
      • scan_check
      • postob
    • Start the schedule
      • schedule=vc189ke