User Tools
operations:down_under_2015_08_03_minutes
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
operations:down_under_2015_08_03_minutes [2015/08/04 04:14] Stuart Weston |
operations:down_under_2015_08_03_minutes [2015/08/04 04:32] (current) Stuart Weston |
||
|---|---|---|---|
| Line 13: | Line 13: | ||
| * R1699 data will be transferred in real-time to Bonn | * R1699 data will be transferred in real-time to Bonn | ||
| * Check "antcn" and "slewing"/"tracking" for Motor Status master registers: Stuart / Ed | * Check "antcn" and "slewing"/"tracking" for Motor Status master registers: Stuart / Ed | ||
| + | * Antenna Controler (12m & 30m) : the ethernet interface hangs due to supurious modbus packets from some where. We have setup ACL's on the network switches to isolate and control access. Since putting in ACL's no more ethernet interface hangs, will keep monitoring. | ||
| * Network Coordinators | * Network Coordinators | ||
| * Windstow testing on Hobart 12m (see above) | * Windstow testing on Hobart 12m (see above) | ||
| * 0 to 360 problem. Is it fixed? Jim and Jamie to test but also ask observers. | * 0 to 360 problem. Is it fixed? Jim and Jamie to test but also ask observers. | ||
| * PCFS at Ke crashing: Ed to add popen so system load can be monitored in FS log | * PCFS at Ke crashing: Ed to add popen so system load can be monitored in FS log | ||
/home/www/auscope/opswiki/data/attic/operations/down_under_2015_08_03_minutes.1438661648.txt.gz · Last modified: 2015/08/04 04:14 by Stuart Weston
Page Tools
