User Tools
operations:operations.vsn_check
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:operations.vsn_check [2012/08/16 02:06] Jim Lovell |
operations:operations.vsn_check [2014/08/25 01:42] (current) Imogen Jones [Repairing VSN labels] |
||
|---|---|---|---|
| Line 15: | Line 15: | ||
| These cameras have pre-defined way-points (menu in lower right). Select the Mark5 recorder (e.g. for Hobart it's "mk5hb"). you may have to pan and zoom a bit to ready the label. Compare the label with the one reported by e-Remote control. If they agree, then fine. If not, see below. | These cameras have pre-defined way-points (menu in lower right). Select the Mark5 recorder (e.g. for Hobart it's "mk5hb"). you may have to pan and zoom a bit to ready the label. Compare the label with the one reported by e-Remote control. If they agree, then fine. If not, see below. | ||
| + | |||
| + | **If it's dark in the Katherine control room** and you can't see the modules, you can [[operations:documentation:ke_lights|turn on the lights at Katherine]] but please remember to turn them off again when you're finished to discourage the insects. | ||
| If there is a second module loaded, select it as follows: | If there is a second module loaded, select it as follows: | ||
| Line 27: | Line 29: | ||
| ===== Repairing VSN labels ===== | ===== Repairing VSN labels ===== | ||
| + | |||
| + | <note warning>DO NOT use this procedure if there is already data on the module</note> | ||
| If the VSN reported by e-Remote control doesn't agree with the sticker, do the following: | If the VSN reported by e-Remote control doesn't agree with the sticker, do the following: | ||
/home/www/auscope/opswiki/data/attic/operations/operations.vsn_check.1345082796.txt.gz · Last modified: 2012/08/16 02:06 by Jim Lovell
Page Tools
