There are three IPSs that can can be used to reboot computers in the event they are unreachable using normal (ssh/vnc) methods.

They are:

ipshb.phys.utas.edu.au
ipske.phys.utas.edu.au
ipsyg.phys.utas.edu.au

They have a fairly straightforward web interface. The username for all three is 'admin', and the password should be the standard root password, however one may be non standard. If you run into any problems you should consult your on-call person.

You may receive a 'Server is Busy' and/or 'There may be someone else logged in to the ips' error. In this case you can still telnet in:

telnet ipshb.phys.utas.edu.au
*******
/Off 5
/On 5
/X

In this case we are restarting plug 5.

(Note that scripts exist at Katherine to control the lights and reset the webcam)

After this you will need to restart and reconfigure the DBBC, instructions are here:

http://auscope.phys.utas.edu.au/opswiki/doku.php?id=operations:documentation.dbbcsetupivs_9.10.5

In econtrol to get the DBBC talking to the mk5:

setupsx

In pcfs[hb|ke|yg] sync everything:

fmset

In econtrol reset the counters for clkoff and maserdelay:

counter

A clkoff and maserdelay would also be wise to check the delays are OK and stable.

List of ports available for on/off/boot at Katherine:

Plug	Name	Status	On	 - Installed 2 of power distribution units (PDU). These are like an 8 way power board that have individually switched outputs. They can be switched from a web interface at the following 2 links:
\\ [[http://pdu1ke.phys.utas.edu.au/outlet.htm|pdu1ke.phys.utas.edu.au/outlet.htm]]
\\ [[http://pdu2ke.phys.utas.edu.au/outlet.htm|pdu2ke.phys.utas.edu.au/outlet.htm]]

The user is admin and the password is the same one we use for the internet power switches.
\\ PDU1KE so far has wifi, cduke (network maint computer) and the interior light.
\\ PDU2KE so far has mk5-2ke and the GPIB controller.
Off	Boot	Default
1	pcfske	ON				ON
2	mk5ke	ON				ON
3	timeke	ON				ON
4	windke	ON				ON
5	DBBC	ON				ON
6	Camera	ON				ON
7	ExteriorLight	OFF				OFF
8	AgilentUSBHub ON                        ON

At Katherine there are two power distribution units (PDU). These are like an 8 way power board that have individually switched outputs. They can be switched from a web interface at the following 2 links:
pdu1ke.phys.utas.edu.au/outlet.htm
pdu2ke.phys.utas.edu.au/outlet.htm

The user is admin and the password is the same one we use for the internet power switches.
PDU1KE so far has wifi, cduke (network maint computer) and the interior light.
PDU2KE so far has mk5-2ke and the GPIB controller.