User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


R1844

Yarragadee 12m

Disk VSN: USN-0150/4000/| Data volume at beginning: 0.0 GB

During setup could not sync MK5 to *exactly* the field system/computer time. They were ticking the same but would not sync to the nearest 0.1s

  • 17:00:00 UT experiment start okay (Lucas).
2018/05/29 06:18 · Tiege McCarthy · 1 Comment
r4843

Yarragadee 12m

Disk VSN: BKG-0037/2000/1024 | Data volume at beginning: 0.0 GB

  • 18:30 - Windstowed.
  • 23:04 - Auto-stow issue resolved by restarting the FS, first good data from 23:04 (JMc)
2018/05/24 22:55 · Jamie McCallum · 0 Comments
r1843

Yarragadee

Disk VSN: HART+106/ | Data volume at beginning: 4619.6 GB

  • 1700UT - Experiment started OK (Lucas)
2018/05/23 06:39 · Tiege McCarthy · 0 Comments
aov023

Yarragadee

Disk VSN: HART+106/ | Data volume at beginning: 0.00 GB

  • 1600UT - Experiment started OK (Katie)

Hobart26

Disk VSN: HOB+0119/ | Data volume at beginning: 0.00 GB

  • 1600UT - Experiment started OK (Katie)
  • 16:40UT ALARM: error fl -1 previous source in this schedule not reached before new source was commanded
  • 00:28UT ALARM: error fl -1 previous source in this schedule not reached before new source was commanded. Getting these alarms probably due to wind stows.Wind speed reaching up to 45 km/h.
  • 02:27UT Windstow started. (JMc)
  • 02:48UT Back onsource (JMc)
  • 06:17UT Windstow started. (JMc)
2018/05/21 16:43 · Tiege McCarthy · 0 Comments
r4842

Yarragadee

Disk VSN: NRAO-108/2000 | Data volume at beginning: 0.00 GB

  • 1830UT - Experiment started OK (Ross)
2018/05/17 07:14 · Ross Turner · 0 Comments
AUA044

Yarragadee

Disk VSN: HOB+1004/16000 | Data volume at beginning: 857.48 GB

  • 1800UT - Experiment started OK (Patrick)
2018/05/16 17:34 · Simin Salarpour
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan