User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


rv123

Yarragadee 12m

Disk VSN: FGI-0004

Data volume at beginning: 0 GB

  • 18:20UT Experiment Started Okay (Liz)
2017/06/29 14:18 · Jesse Swan · 0 Comments
RD1706

Hobart 26m:

Disk VSN: HOB+1007/16000

Data volume at beginning: 0 GB

  • 1730UT Experiment started OK (Mas)
  • 14:33UT ALARM Previous source in schedule not reached, affected scan 179-1431 (Liz)
  • 14:35UT ALARM Previous source in schedule not reached, affected scan 179-1434a (Liz)
  • 14:37UT okay now from scan 179-1437a (Liz)
2017/06/27 23:20 · Jesse Swan · 0 Comments
R1798

Katherine 12m:

Disk VSN:USN-0085

Data volume at beginning: 0 GB

  • 1730UT Experiment started OK (JS)
  • 0223UT Schedule returned to beginning and progressed through scans up to present scan over about 10 minutes, missed scan 178-0223a through 178-0239a (Ross)

Yarragadee 12m:

Disk VSN:USN-0067

Data volume at beginning: 0.064 GB

  • 1730UT Experiment started OK (JS)
2017/06/26 15:48 · Jesse Swan
r4797

Katherine 12m:

Disk VSN:PKS-007

Data volume at beginning: 0 GB

  • 18:30UT Exp started OK

Yarragadee 12m:

Disk VSN:JIVE-020

Data volume at beginning: 0 GB

  • 1830UT Antenna stuck, not likely to be fixed till daybreak. (Arwin)
  • Brett managed to get elevation drives up. Fist scan is 173-2332 (Jim)
  • Disk offset is 266.6 GB
2017/06/22 18:05 · Tiege McCarthy
b17172

Katherine

Disk VSN: HOB+0125

Data Volume at Beginning: 6016.683 GB

  • Disk does not have VSN assigned.
  • Really bad connection to Katherine - I had to do setup with vncviewer, as I couldn't get eremote to connect.
  • 1800 UT Experiment started
  • 1800 UT Large Delay through dbbc. Reformatting dbbc. (Bryn)
  • 1810 UT resumed schedule (Bryn)
  • 1825 UT Field system locked up - can't enter anything in operin. Restarting fs. (Bryn)
  • 1830 UT Resumed experiment, first scan 172-1835 with source 1920-211 (Bryn)

Yarragadee

Disk VSN: HART+104

Data Volume at Beginning: 6080.328 GB

  • 18:00UT Experiment started OK (Bryn)
2017/06/21 18:11 · Tiege McCarthy · 0 Comments
ohig?? - b17172

Katherine: if enough space, continue recording onto the 8TB module (as is AOV). The 2 TB module is for the R4. (Lucia)

aov016

Hobart 12m:

Disk VSN: HOB+0125/32000/1024

Data volume at beginning: 8170.507 GB

  • Experiment started okay (Patrick)

Katherine 12m:

Disk VSN: GSFC+011/8000

Data volume at beginning: 0.0 GB

  • 1827UT: Experiment started late due to network being down. (Patrick)
  • Module has no VSN assigned, however the label on the module is correct. Need to set module VSN. (Patrick)
  • Weather command 'wx' is not working, only returns 19.09, 998.8990. 56.20. (Patrick)
  • 00:30UT - Problems when inserting a new module. Mk5 locked up. Jamie fixed it. Mk5 time was off, had to resync (corrected for 1 second). Lost scans 0011 through 0037. (Lucia)
  • 00:40UT - Weather is now working again (Lucia).
  • 06:50UT - weather sensor is stuck again, gives identical value each scan. Jamie is fixing it, though he still has to write down how. (Lucia)

Yarragadee 12m:

Disk VSN: HART+104/8000/1024

Data volume at beginning: 37.949 GB

  • 1755UT: Experiment started late because antenna was stuck. e-RemoteCtrl won't connect, streaming logs instead (Patrick)
  • 1859UT: Successfully started e-RemoteCtrl. Left log streaming (Patrick)
2017/06/20 18:02 · Tiege McCarthy · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan