User Tools
Sidebar
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Handover notes
Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.
Notes should be placed below the horizontal line as a new blog entry.
Continuing problems should be copied to the Current Issues page.
**Template for Handover notes:**
Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.
====== Experiment Name ====== **Hobart 12m** Disk VSN: abc-123 | Data volume at beginning: 2.34 GB * 1300UT a comment from me (user) **Katherine 12m** Disk VSN: | Data volume at beginning: GB * **Yarragadee 12m** Disk VSN: | Data volume at beginning: GB * 1300UT Experiment started okay (JMc).
Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!
Time stamp in UT * Comment * (Your Name)
For Example:
20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)
20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)
Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.
OHG100
Katherine 12m undergoing maintenance (not observing)
Hobart 12m
Module: HOB+0119, start pos:
No other module to record onto, R1726 first experiment on here.
- 17:30 UT - Experiment started ok. (Ellen)
Yarragadee 12m
Module: USN-0150, start pos 0 GB
- 17:30 UT - Experiment started ok. (Ellen)
R1726
Katherine 12m undergoing maintenance (not observing)
Hobart
Module: HOB+0119, start pos 0GB
17:00 UT - Experiment started OK (Jonny)
Yarragadee
Module: MED-0038, start pos 0GB
17:00 UT - Experiment started OK (Jonny)
R4725
- General Note: Had some real issues this morning preparing the schedule files, had to DRUDJ 3+ times for each station in order to get all the files on all the machines correctly. (Tiege)
Katherine
Module: USN-0023, start pos 0 GB
- 18:30 UT - Experiment started OK. (Tiege)
Yarragadee
Module: USN-0141, start pos 0 GB
- 18:30 UT - Experiment started OK. (Tiege)
AOV007
Hobart 12m undergoing maintenance (not observing)
Hobart 26m Module: TR-00012, start pos 0 GB
- 1720UT Have to head out to the telescope to reset rakbus and drive-pc (JS)
- 1835UT everything reset and working now, set to start on scan (line 245) everything before was missed (JS)
- 1155UT approx telescope issue with drives, resolved by Jamie at ~1205UT (Bryn)
Katherine
Module: xxx, start pos 0 GB
- 1730UT - Experiment started ok. (JS)
Yarragadee
Module: xxx, start pos 0 GB
- 1730UT - Experiment started ok. (JS)
R1725
Hobart 12m undergoing maintenance (not observing)
Fringe found in channel 15 only of Ke-Yg baseline.
Katherine
Module: BKG-0064, start pos 0 GB
- 17:00 UT - Experiment started ok. (Ellen)
Yarragadee
Module: WSRT-039, start pos 0 GB
- 17:00 UT - Experiment started ok. (Ellen)
r4724
Hobart 12m:
Disk VSN:
Data volume at beginning:
18:30 UT Disk is full, needs a replacement. Experiment on hold until disk replaced. (Bryn)
21:16 UT Fresh volume NRAO-179, schedule started from line 704 - First scan 028-2115 (Bryn)
Katherine 12m:
Disk VSN: NRAO-020 / IAA-0026
Data volume at beginning: 1384 GB / 0 GB
18:30 UT Experiment started on time. (Bryn)
22:14 UT module change necessary due to lack of disk space. Last scan on NRAO-020 is 028-2210b. First scan on new module IAA-0026 is 028-2216. (Lucia)
Yarragadee 12m:
Disk VSN: USN-0164
Data volume at beginning: 0 GB
18:30 UT Experiment started on time. (Bryn)
21:10 UT Autocorrelation spectra looks slightly noisy (Bryn)
08:48 UT Telescope underwent automatic stowage due to high winds, this interrupted the last ~10% of the scan 029-0841b, telescope unstowed at 08:53 UT before the next scan. (Tiege)
