User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


R4707

Katherine

Module: UAO-0026, start pos 0GB

  • 18:30 UT - Experiment started ok after stopping LBA session at 18:00. (Ellen)

Yarragadee

Module: USN-0079, start pos 0 GB

  • 18:30 UT - Experiment started ok after stopping LBA session at 18:00. (Ellen)
2015/10/01 18:30 · 0 Comments
R1707

Ke

VSN: HOB+0029 (+932 GB)

Yg

VSN: USN-0144 (+971 GB)

2015/09/28 15:33 · 0 Comments
aov005

Ke

VSN: HOB+0029 (+0 GB)

Yg

VSN: USN-0114 (+0 GB)

2015/09/25 22:47 · 0 Comments
R4706

Ke

VSN: USN-0186 (at 0 GB)

Yg

VSN: USN-0201 (at 0 GB)

2015/09/24 05:35 · 0 Comments
CRDS79

Hobart 26m

Module: HOB+1004, start pos: ???? GB

Major antenna failure at start of experiment, not participating at present (Ross)

  • 04:15 UT: Hobart rejoined schedule at 0415 after repairs made to emergency stop system. No useful data recorded prior to this time. (JMc)
    • Disk position at start of 0415 scan was 1767 TB (JMc)
  • 06:58 UT: First module (USN-0111) ran out of space, FS automatically swapped to HOB+1004. Starting at 6377 GB. (Dave)
  • 07:00 UT: 20K stage at 40K. (Dave)
  • 08:00 UT: Cryo temp continuing to rise. Driving to Mt.P to turn on vacuum pump. (Dave)
  • 09:00 UT: Cryo pressure now good. Temps going down. (Dave)

Katherine

Module: ???+????, start pos: 2417.620 GB

21:27 UT: large clock jump (Ross).

Module: HOB+0029

Yarragadee

Module: USN+0224, start pos: 2298.335 GB

2015/09/22 18:06 · 0 Comments
R1706

Hobart 26m

Module: HOB+1004, start pos: 4819.273 GB

Windstowed 0436-052 (JMc)

Major antenna failure after 1330 UT (Ross)

Katherine

Module: HAY-0062, start pos: 159.511 GB

Network interruption at ~0300 with associated clock break - likely a brief power glitch. pps_delay through dbbc showed slippage between 0300 and 0315 although no dot? errors. Reconfigured DBBc at 0315, schedule resumed at 0320. (JMc)

Scans affected: 265-0258 to 265-0318

2015.265.16:12:01 ALARM: Delay through DBBC has changed. Scans 265-1611a through 1615b affected (Ross).

2015.265.16:36:03 ALARM: Delay through DBBC has changed. Scans 265-1635 through 1641a affected (Ross).

Yarragadee

Module: USN-0036, start pos: 140.456 GB

2015/09/21 13:12 · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan