Creating raid-z1 with 6 disks and zfs mode.

Transferring data from flexbuflke to flexbuflyg. I used the first 6 disks in vbs mode in flexbuflyg.

m5copy vbs:flexbuflke/mv042* vbs:flexbuflyg/ -n {1,2,3,4,5,6}

After using 6 recordings in parallel and achieving 9 Gbps writing rate, the bottleneck is the 10 Gbps line.

Steps:

• Create the pool of disks with zpool.
• Move data in the disks.
• First test #1: unmount the disks, reshuffle them and mount them again. Pool of disks succesfully detected.
• First test #2: mount the disks in another machine and detect the raid there. Pool of disks detected OK, but in read-mode only. Possible error due to different zfs versions.