User Tools
Sidebar
handover:r4774
This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
R4774
Hobart
Module USN-0014/Start 0.00 GB
- 18:32UT Experiment started late, first scan 012-1832 (Nick)
- 18:32UT Quite a few of the values on the system monitor are red, with drive status and drive control unknown (Nick)
- 18:45UT clkoff-maserdelay delay was excessively large (533072.774 us), reconfiguring the DBBC worked as explained at http://auscope.phys.utas.edu.au/opswiki/doku.php?id=operations:monitoring_hb#clkoff_reading_is_drifting_or_far_from_the_maser-gps_offset (Nick)
Katherine
Module HOB+0130/Start 0.00 GB
- 18:32UT Not running until maser has been fixed.
Yarragadee
Module MPI-0413/Start 0.00 GB
- 18:32UT Experiment started late, first scan 012-1832 (Nick)
- 21:50UT Data is invalid prior to scan 012-2151c (was unable to communicate with the DBBC) (Nick)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r4774.1484259783.txt.gz · Last modified: 2017/01/12 22:23 by Nick Ham
